PLANET FSD-604HP

8:00 am - 5:00 pm
Thứ hai - thứ bảy

info@dmcvn.vn

Mã sản phẩm: FSD-604HP (Taiwan)

The FSD-604HP’s advanced features are as follows:

4-port PoE, 60-watt PoE budget
Two 10/100Mbps uplink ports
Can extend distance of up to 250m in the extend mode
30-watt power output at speed of 10Mbps
Internal AC power, fanless design

Liên hệ

The FSD-604HP

RJ45 Interface

6 10/100Mbps Fast Ethernet ports
4 ports supporting 52V DC power to PoE powered device
Power over Ethernet
Complies with IEEE 802.3af/at Power over Ethernet end-span
Up to 4 IEEE 802.3af/2 IEEE 802.3at devices powered
Supports PoE power up to 30 watts for each PoE port
60-watt PoE budget
Hardware DIP switch for "Standard" and "Extend" mode selection; the "Extend" mode features 30-watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation
Auto detects powered device (PD)
Circuit protection prevents power interference between ports
Remote power feeding up to 100m in the standard mode
Switching
Hardware-based 10/100Mbps auto-negotiation and auto MDI/MDI-X
Flow control for full duplex operation and back pressure for half duplex operation
1536bytes packet size
Integrates address look-up engine, supporting 2K absolute MAC addresses
Automatic address learning and address aging
Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing
Hardware
Desktop palm size
LED indicators for PoE ready/activity and LINK/ACT
Supports contact discharge of ±4KV DC and air discharge of ±6KV DC for Ethernet ESD protection
Supports ±4KV surge immunity
Internal AC power supply

Hardware Specifications
Network Connector	6-port RJ45 for 10/100BASE-TX, auto MDI/MDIX
PoE Inject Port	4-port with 802.3af/at PoE injector function (Port-1 to Port-4)
LED Display	System: Power (Orange) Per PoE port: PoE (Orange, Port 1 to Port 4) LNK/ACT (Green, Port 1 to Port 6)
DIP Switch	100m distance in standard mode 250m distance in extend mode (based on the cable category)
Switch Architecture	Store and Forward switch architecture
MAC Address Table	2K MAC address table with auto learning function
Switch Fabric	1.2Gbps
Switch Throughput	0.89Mpps @64bytes
Maximum Packet Size	1536bytes
Flow Control	Back pressure for half duplex. IEEE 802.3x pause frame for full duplex
Power Requirements	AC 100~240V, 2A max.
Power Consumption	Max. 63 watts, 214 BTU
Dimensions (W x D x H)	168 x 93 x 32 mm
Weight	499g
ESD Protection	Contact discharge of ±4KV DC Air discharge of ±6KV DC
Surge Immunity	±4KV
Power over Ethernet
PoE Standard	IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type	End-span
Power Pin Assignment	1/2(+), 3/6(-)
PoE Power Output	Per Port 52V DC, 300mA. max. 15.4 watts (IEEE 802.3af) Per Port 52V DC, 600mA. max. 30 watts (IEEE 802.3at)
PoE Power Budget	60 watts
Number of PDs, 7 watts	4
Number of PDs, 15.4 watts	4
Number of PDs, 30 watts	2
Standard Conformance
EMI Safety	CE, FCC
Standard Compliance	IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus
Environment
Operating Environment	0 ~ 50 degrees C
Storage Environment	-10 ~ 70 degrees C
Operating Humidity	5 ~ 95%, relative humidity, non-condensing
Storage Humidity	5 ~ 95%, relative humidity, non-condensing